|
| |
- Painting
Techniques for CPI-210
- NOTES
for non-fired finishing:
BC means Basecoat; DB means drybrush: HL means Highlight; WB means wipe
back using #760
Antique Media;
PB means Pat Back with soft cloth. Spray
means spray with #761 Perfect Matte
Spray. NOTE: Always refer to picture for placement of colors.
NOTE: Materials needed to
finish a piece are highlighted in bold print the first time they are used.
- NOTES
for glazed finishing:
Fire
bisque to cone 04. Antique
means Apply one coat & wipe back with a clean wet sponge, leaving color
primarily only in the creases & detail areas. HL means highlight
with a light coat of specified color to raised areas. Float means
apply thinned specified color to recessed areas using a square shader with
color on half of the brush. Finish means, after piece is completely
dry, apply clear glaze of choice according to manufacturers instruction &
fire to cone 06.
-
- 3809
Genie
“Amira”
- Antique
magic rug & cloud: SC-13 Grapel.
Antique Hair & Skin: SC-41 Brown
Cow, Antique the rest: SC-18
Rosie Posie. Hair: Apply 3 coats SC-51
Rawhide. Float streaks of SC-48
Camel Back to deep areas in the hair & SC-54
Vanilla Dip to high areas. Skin: Apply 3 coats SC-30 Birthday Suit. Apply watered down SC-21 Sunburn all over flesh areas. Blush cheeks & Lips SC-18
Rosey Posey Line crease in mouth SC-3
Wine About It. Paint eyes SC-16
Cotton Tail, SC-7 Leaping Lizard, SC-8
Just Froggy & SC-15 Tuxedo
Eyebrows SC-48 Camel Back. Top, hip band, top triangles in
headband & Shoes: Apply 3 coats SC-3 Wine About It. Bottom
triangles in headband, Neckline & wristbands: Apply 3 coats SC-17
Cheeky Pink Scarf & pants: Apply 3 coats SC-1 Pink-A-Boo. Float SC-70
Pink-A-Dot in deep areas and along bottom edge of pants. Magic rug:
Apply 3 coats SC-13 Grapel, SC-11
Blue Yonder & SC-12 Moody Blue. Paint designs & fringe with two
coats of SC-Dandelion & SC-13 Grapel. Clouds: Float SC-65 Peritwinkle
into deep areas. Float SC-30 Blue
Dawn around edges. HL SC-16 Cotton Tail. FINISH.
-
- 3815
Keeling Fairy 5.5” t
- Antique
Hair & Skin: SC-14 Java Bean.
Antique Wings SC-33 Fruit of the Vine.
Antique dress: SC-29 Blue Grass.
Antique flower SC-3 Wine About It.
Hair: Apply 3 coats SC-51 Poo
Bear. Float streaks of SC-25
Crackerjack to deep areas & SC-46
Rawhide to high areas. Skin: Apply 3 coats SC-30
Birthday Suit. Apply watered down SC-21
Sunburn all over flesh areas. Blush cheeks & Lips SC-18 Rosey Posey Line crease in mouth SC-3 Wine About It. Paint eyes SC-16
Cotton Tail, SC-7 Leaping Lizard,
SC-8 Just Froggy & SC-15
Tuxedo Eyebrows SC-25 Crackerjack. Dress: Apply 3 coats SC-11
Blue Yonder. Float SC-13 Grapel to
bottom edge & just above waistline. HL SC-30
Blue Dawn. Flower:
Apply 3 coats SC-70 Pink-A-Dot. Float SC-18
Rosie Posie to edges. Apply 3
coats of SC-Dandelion to centers.
HL SC-6 Sunkissed. Glaze petal
trim with three coats SC-16 Cotton Tail & SC-18 Rosie Posie. Wings:
Apply 3 coats SP-30 Blue Dawn.
Glaze Spot & Stripes withSC-13 Grapel SP-15
Tuxedo & SC-16 Cotton Tail. FINISH.
-
- 3810
Roulette
Chip/Dip 17”
dia
- 3811
Roulette Lid
- 3812
Roulette
Spindle
- 3813
Spade/Club
Trays 5.25” l
- 3814
Heart/Diamond Tray 5.25”
l
- Fire
all pieces to cone 04 bisque. Glaze with three coats SC-15 Tuxedo: underside of lid, inside of dip bowl,
outside rim, alternating squares & sections of chip plate, both
inside & outsides edges of the Spade & Club Trays and club
& spade. Glaze with three
coats of SC-74 Hot Tomalẻ:
alternating squares & sections of of chip plate. both inside
& outsides edges of the Heart & Diamond Trays &
heart, diamond & A’s Allow pieces to dry completely between coats.
- Glaze
spindle and all gold areas with SC-24
Dandelion (as pictured). Dip with clear glaze of your choice. Step 3:
Fire to #06 cone. Glaze spindle and all gold areas Bright Gold. Fire to #18 Cone.
-
- 3817
Lg Pottery Bunny 11” t
- 3818
Sm Pottery Bunny 8.25” t
- 3819
Pottery Bunny Base
- Base:
Apply three coats of EL 106 Tidal
Pool.
- White Bunnies: Apply three coats of PC-501
Terra Cotta. Apply Wax Resist to
feet & inside of ears. Apply 3 coats S
2565 Cloud White. Paint radishes SC-18
Rosey Posie. Paint Leaves SC-39
Army Surplus. Paint flower SC-30
Blue Dawn. Outline flower & radishes & paint eyes & mouth
with SC-15 Tuxedo.
Natural Bunnies: Fire
bisque to witness cone 04. Apply 2 coats 50/50 mixture of PC-503
Khaki Pottery Coat & PC-502
Speckled Buff Pottery Coat. Dry. Apply OS1
Mirror Black to eyes. Apply Wax
Resist to faces & feet. Apply watered down OS8 Briar Wood to front paw & ears. Apply SC-18 Rosey Posey to
inside of ears & nose. Paint Flower OS-147
Powder Blue. Paint radishes 0S-3
Lip Red. Paint Stems & leaves OS-41
Real Holly Leaves. Cover these areas with 2 coats of S-2000 Natural Claze. Apply 3 coats S-2566 Almond to the rest. Dry. Apply 2 coats PC-601 Clear Cascade to almond coated areas. Fire to witness cone
06.
-
- 3820
Pizza
Slice 11”
l
- Italian Design:
Apply
three coats of S-2566 Almond
Apply one coat of thinned SC-27 Sour
Apple and SC-5 Tiger Tail
randomly. While the third coat is still wet on the plates, spray very
diluted SC-34 Down To Earth onto the wet glaze.
Use a small spritzer water bottle. After thoroughly drying draw on
design. Apply SC-39 Army Surplus to
leaves; tip in SC-63 Popeye’s
Favorite, stroke in leaves, applying two coats. For olives, use same
brush and load in SC-15 Tuxedo
and tip brush with SC-71 Purple-licious,
applying one coat. Apply two
coats SC-39 Army Surplus and two coats SC-16
Cottontail to crust edge. Outline
leaves, stems and lines on crust edge with SC-15 Tuxedo. Finish.
- Pizza Night Design:
Glazed with three coats of SC-55
Yella Bout It, SC-46 Rawhide,
SC-30 Blue Dawn. Trim, letters
& designs done with OS-1 Mirror
Black. Finish.
-
- 3821
Lighthouse Cross 13” t
- 3807
Cross Background 12” t
- 3808
Background attachment
- BC
#750 Bisque Primer. Antique #719
Ebony. WB. Wipe sky & buildings back to white. Apply a mixture of #713 Primrose & #704
Taupe to lower part of sky. Apply a mixture of #711
Sapphire & #700 White to
top area of sky. Blend the top and bottom of the sky together with a brush.
Lightly pounce #700 White on the sky as clouds. HL some of the clouds with a
small amount of #710 Sunshine.
Rouge rocks with #718 Amber
to highlight. Apply #901 Black
to creases of rocks. Apply #707
Evergreen to grass and trees. HL grass #710 Sunshine. HL trees #708
Emerald. Apply #714 Teal to water. HL water edges #700 White. Pounce
some #700 White up on the cliffs as sea spray. Apply #715
Burgundy
to
building roof. Apply #711 Sapphire to lighthouse roof. Paint stripes on
lighthouse #701 Black, PB. HL Light house with #710 Sunshine. Make beams
coming from light with #710 Sunshine & #700 White. Apply #701 Black to
house door. Apply #710 Sunshine to all windows. Apply #700 White to fence.
Spray and paint lettering with 902
Black.
-
- 3822
Nature
Rock (Turtles) 7.5”
l
- 3826
Rock Pod,
- 3828
Rock
Base
- BC three coats of #750 Bisque Primer to all pieces. Antique #717 Mushroom, WB. Wipe
word area back a little lighter. Apply #704
Taupe to rocks, PB. Rouge #715
Burgundy
, #711 Sapphire & #714 Teal.
Lightly blend with #763 Antique Media. Apply #740 Walnut to log, PB. HL
#709 Topaz.
Apply #715
Burgundy
to fern & vine stems, PB.
Rouge #712 Amethyst & #713
Primrose. Apply #707 Evergreen
to leaves, PB. Rouge vine leaf
centers #715
Burgundy
.
Highlight green leaves #710 Sunshine. Apply #701
Black to turtles, WB. Apply Evergreen to Shell.
HL #710 Sunshine. Apply mixture of #710 Sunshine & #707 Evergreen to turtle
Skin. HL with mixture of #700
White, #710 Sunshine & #707 Evergreen. Paint an X with a line thru
the middle on shell sections #931
Medium Yellow. Paint eyes with
#900 White & #902 Black.
Paint claws #901 Bone. Apply #704
Taupe to mushrooms. Rouge tops #706
Tangerine & Edges #705 Ruby.
Dot #900 White. Paint ladybug
#910 Scarlet Red & #902
Black. Shade all deep areas with #701 Black.
Paint letters #902 Black. Apply
#714 Teal to inside of pod and wipe back with antique media and a soft
cloth. Spray
thoroughly inside & out to waterproof. After thoroughly drying, run
tube through hole in the back of turtle rock to the hole in the top; glue
inside with glue gun. Attach pump outside of the turtle rock (in the back)
with glue gun. We
used an amber light in a clip light fixture to light up the inside.
-
-
- See detailed instructions
about making any of these Handbuilding Projects, and others, in the “Project
Library” at www.handbuilding.com
-
|
